K0047 Corrosion Cell Kit

The K0105 extends the versatility of the basic K0047 corrosion measurement system by allowing the corrosion characteristics of flat specimens to be readily determined. This Tefzel holder is designed to accept flat specimens 0.625 ± 0.010" in diameter and up to 1/8" thick. The sealing washer is made of Kalrez and exposes 1 cm2 of the specimen to the test solution. The flat specimen holder attaches to G0097 electrode holder so that it can be used with the G0096 corrosion flask. The 2517-0921-0 Sample Holder Rod is made of 303 Stainless Steel.

The K0105 Kit includes:

This kit contains 4 replacement Kalrez washers for the K0105 Flat Specimen Holder Kit.

The K0157 Kit includes:

This washer eliminates crevice corrosion in the K0105 Flat Specimen Holder by sealing with a "knife-edge" instead of a flat surface. This Teflon washer is used in place of the normal Kalrez sealing washer, K0157. Due to the cold-flow characteristics of Teflon, these gaskets should be used once and discarded. They can be purchased in a package of 25.

The K0106 O-ring kit contains three pairs of replacement Kalrez O-rings and washers. The Kalrez washers are elastic and can be used many times before needing replacement.

The K0106 Kit includes:

• Used for reference electrode and reference electrode bridge tube storage
• 25/18 Standard Ground Ball Socket

This glass adapter is used for temperature controlled experiments where use of a thermometer is necessary. It can be used in place of one of the G0098 threaded counter electrode adapters. It accommodates the G0091 Graphite Rod as well as a standard 1/4" diameter thermometer and includes a fitting for purge gas. Thermometer not included.

• 24/40 Standard Taper Joint