References which use a PARSTAT 2273 as of March 29th, 2011.
1.) P.C. Banerjee and R.K.S. Raman, "Electrochemical Impedance Spectroscopic Investigation of the Role of Alkaline Pre-Treatment in Corrosion Resistance of a Silane Coating on Magnesium Alloy, Ze41",
Electrochimica Acta(2011).
DOI:
http://dx.doi.org/10.1016/j.electacta.2011.02.050
2.) M. Biso, A. Ansaldo, D.N. Futaba, K. Hata and D. Ricci, "Cross-Linking Super-Growth Carbon Nanotubes to Boost the Performance of Bucky Gel Actuators",
Carbon, 49, 2253 (2011).
DOI:
http://dx.doi.org/10.1016/j.carbon.2011.01.057
3.) A. Ciaccafava, M. Alberola, S. Hameury, P. Infossi, M.T. Giudici-Orticoni and E. Lojou, "Hydrogen Bioelectrooxidation in Ionic Liquids: From Cytochrome C3 Redox Behavior to Hydrogenase Activity",
Electrochimica Acta, 56, 3359 (2011).
DOI: htt
p://dx.doi.org/10.1016/j.electacta.2010.12.104
4.) G. Digiuseppe and L. Sun, "Electrochemical Performance of a Solid Oxide Fuel Cell with an Lscf Cathode under Different Oxygen Concentrations",
International Journal of Hydrogen Energy, 1 (2011).
DOI:
http://dx.doi.org/10.1016/j.ijhydene.2011.01.017
5.) V.L. Finkenstadt, G.L. Cote and J.L. Willett, "Corrosion Protection of Low-Carbon Steel Using Exopolysaccharide Coatings from Leuconostoc Mesenteroides",
Biotechnology Letters (2011).
DOI:
http://dx.doi.org/10.1007/s10529-011-0539-2
6.) R.V. Gudavarthy, A.S. Miller, E.W. Bohannan, E.A. Kulp, Z. He and J.A. Switzer, "Resistance Switching in Electrodeposited Polycrystalline Fe3o4 Films",
Electrochimica Acta (2011).
DOI:
http://dx.doi.org/10.1016/j.electacta.2011.02.032
7.) D.-J. Guo and Z.-H. Jing, "Electrocatalytic Properties of Platinum Nanoparticles Supported on Fluorine Tin Dioxide/Multi-Walled Carbon Nanotube Composites for Methanol Electro-Oxidation in Acidic Medium",
Journal of Colloid and Interface Science (2011).
DOI:
http://dx.doi.org/10.1016/j.jcis.2011.03.019
8.) W. Li, L. Hu, Z. Tao, H. Tian and B. Hou, "Experimental and Quantum Chemical Studies on Two Triazole Derivatives as Corrosion Inhibitors for Mild Steel in Acid Media",
Materials and Corrosion, 62, 9999 (2011).
DOI:
http://dx.doi.org/10.1002/maco.201005965
9.) Y. Li, X. Pang, R.F. Epand and I. Zhitomirsky, "Electrodeposition of Chitosan–Hemoglobin Films",
Materials Letters, 65, 1463 (2011).
DOI:
http://dx.doi.org/10.1016/j.matlet.2011.02.038
10.) X.-H. Li, S.-D. Deng and H. Fu, "Adsorption and Inhibitive Action of Hexadecylpyridinium Bromide on Steel in Phosphoric Acid Produced by Dihydrate Wet Method Process",
Journal of Applied Electrochemistry (2011).
DOI:
http://dx.doi.org/10.1007/s10800-011-0265-4
11.) X. Liu, T. Zhang, Y. Shao, G. Meng and F. Wang, "Effect of Alternating Voltage Treatment on Corrosion Resistance of Az91d Magnesium Alloy",
Materials and Corrosion, 62, 9999 (2011).
DOI:
http://dx.doi.org/10.1002/maco.201005999
12.) W. Ma, C. Zhao, H. Lin, G. Zhang and H. Na, "Poly(Aryl Ether Ketone)S with Bromomethyl Groups: Synthesis and Quaternary Amination",
Journal of Applied Polymer Science, 120, 3477 (2011).
DOI:
http://dx.doi.org/10.1007/s10800-011-0265-4
13.) K. Mallaiya, R. Subramaniam, S.S. Srikandan, S. Gowri, N.Rajasekaran and A.Selvaraj, "Electrochemical Characterization of the Protective Film Formed by the Unsymmetrical Schiff's Base on the Mild Steel Surface in Acid Media",
Electrochimica Acta (2011).
DOI:
http://dx.doi.org/10.1016/j.electacta.2011.02.036
14.) T. Ren, R. Yu, M. Zhong, J. Shi and C. Li, "Microstructure Evolution of Cuinse2 Thin Films Prepared by Single-Bath Electrodeposition",
Solar Energy Materials and Solar Cells, 95, 510 (2011).
DOI:
http://dx.doi.org/10.1016/j.solmat.2010.09.011
15.) C. Song, W. Shia, H. Jiang, J. Tu and D. Ge, "Ph-Sensitive Characteristics of Poly(Acrylic Acid)-Functionalized Anodic Aluminum Oxide (Aao) Membranes",
Journal of Membrane Science, 372, 340 (2011).
DOI:
http://dx.doi.org/10.1016/j.memsci.2011.02.017
16.) J. Sun, B. Hou, P. Zhang and Y.-Y. Hu, "Effect of Congo Red on Electrochemical Characteristics of the Bioanode of Microbial Fuel Cell Explored for Simultaneous Azo Dye-Containing Wastewater Treatment and Electricity Generation",
2011 Third International Conference on Measuring Technology and Mechatronics Automation, (2011).
17.) M. Ünlü, J. Zhou, I. Anestis-Richard, H. Kim and P.A. Kohl, "Improved Gas Diffusion Electrodes for Hybrid Polymer Electrolyte Fuel Cells",
Electrochimica Acta (2011).
DOI:
http://dx.doi.org/10.1016/j.electacta.2011.02.017
18.) T. Yang, N. Zhang, Y. Langa and K. Sun, "Enhanced Rate Performance of Carbon-Coated Lini0.5mn1.5o4 Cathode Material for Lithium Ion Batteries",
Electrochimica Acta (2011).
DOI:
http://dx.doi.org/10.1016/j.electacta.2010.12.109
19.) L.-J. Yang, H.-J. Yu, L.-J. Jiang, L. Zhu, X.-Y. Jian and Z. Wang, "Graphite-Polypyrrole Coated 316l Stainless Steel as Bipolar Plates for Proton Exchange Membrane Fuel Cells",
International Journal of Minerals, Metallurgy, and Materials, 18, 53 (2011).
DOI:
http://dx.doi.org/10.1007/s12613-011-0399-8
20.) T. Yuan, R. Cai and Z. Shao, "Different Effect of the Atmospheres on the Phase Formation and Performance of Li4ti5o12 Prepared from Ball-Milling-Assisted Solid-Phase Reaction with Pristine and Carbon-Precoated Tio2 as Starting Materials",
Journal of Phys. Chem. C, 115, 4943 (2011).
DOI:
http://dx.doi.org/10.1007/s12613-011-0399-8
21.) X. Zhou, H. Yang and F. Wang, "[Bmim]Bf4 Ionic Liquids as Effective Inhibitor for Carbon Steel in Alkaline Chloride Solution",
Electrochimica Acta (2011).
DOI:
http://dx.doi.org/10.1016/j.electacta.2011.01.081
22.) X. Zhou, L. Liu, J. Zhen, S. Zhu, B. Li, K. Sunb and P. Wang, "Ionic Conductivity, Sintering and Thermal Expansion Behaviors of Mixed Ion Conductor Bazr0.1ce0.7y0.1yb0.1o3- Prepared by Ethylene Diamine Tetraacetic Acid Assisted Glycine Nitrate Process",
Journal of Power Sources, 196, 5000 (2011).
DOI:
http://dx.doi.org/10.1016/j.jpowsour.2011.01.092
23.) M. Zhou, H. Särkkä and M. Sillanpää, "A Comparative Experimental Study on Methyl Orange Degradation by Electrochemical Oxidation on Bdd and Mmo Electrodes",
Separation and Purification Technology (2011).
DOI:
http://dx.doi.org/10.1016/j.seppur.2011.02.013
24.) C.Z. Deng, J.S. Stinson, H. Chen, F. Contu and S.R. Taylor, "Application of Electrochemical Impedance Spectroscopy for Implants with Sputtered Iridium Oxide Coatings",
Medical Device Materials V: Proceedings from the Materials & Processes for Medical Devices Conference 2009, (2010).
25.) Z. Jiang, T. Norby and H. Middleton, "Evaluation of Metastable Pitting on Titanium by Charge Integration of Current Transients",
Corrosion Science, 52, 3158 (2010).
DOI:
http://dx.doi.org/10.1016/j.corsci.2010.03.012
26.) Z. Jiang, X. Dai and H. Middleton, "Investigation on Passivity of Titanium under Steady-State Conditions in Acidic Solutions",
Materials Chemistry and Physics (2010).
DOI:
http://dx.doi.org/10.1016/j.matchemphys.2010.12.028
27.) E. Matei, I. Enculescu, V. Vasilache and C.M. Teodorescu, "Cobalt-Doped Zno Prepared by Electrochemistry: Chemistry, Morphology, and Magnetism",
Physica Status Solidi a, 207, 2517 (2010).
DOI:
http://dx.doi.org/10.1002/pssa.200925378
28.) E. Matei, L. Ion, S. Antohe, R. Neumann and I. Enculescu, "Multisegment Cdte Nanowire Homojunction Photodiode",
Nanotechnology, 21, 105202 (2010).
DOI:
http://dx.doi.org/10.1088/0957-4484/21/10/105202
29.) X. Qiuwei, C. Si, S. Daoming, L. Jin and J. Yiming, "Characterization and Cathode Electrophoresis Deposition of Cerium Modified Films on Al 5083",
Acta Metallurgia Sinca, 46, 352 (2010).
DOI:
http://dx.doi.org/10.3724/SP.J.1037.2009.00536
30.) M.F.D. Riccardis, V. Martina, D. Carbone, M. Re, E. Pesce, R. Terzia and B. Bozzini, "Incorporation of Montmorillonite in Epoxy to Obtain a Protective Layer Prepared by Electrophoretic Deposition",
Materials Chemistry and Physics, 125, 271 (2010).
DOI:
http://dx.doi.org/10.1016/j.matchemphys.2010.09.027
31.) S. Sathiyanarayanan, V. Karpakam, K. Kamaraj, S. Muthukrishnan and G. Venkatachari, "Sulphonate Doped Polyaniline Containing Coatings for Corrosion Protection of Iron",
Surface and Coatings Technology, 204, 1426 (2010).
DOI:
http://dx.doi.org/10.1016/j.surfcoat.2009.09.037
32.) D. Starosvetsky, N. Sezin and Y. Ein-Eli, "Seedless Copper Electroplating on Ta from a “Single” Electrolytic Bath",
Electrochimica Acta, 55, 1656 (2010).
DOI:
http://dx.doi.org/10.1016/j.electacta.2009.10.044
33.) D.M. Sun, Y.M. Jiang, Q.W. Xiang, C. Zhong, J. Gong, L.H. Zhang and J. Li, "Ex Situ Tem Observation of Localized Attack on Aa 6061",
Materials and Corrosion, 61, 105 (2010).
DOI:
http://dx.doi.org/10.1002/maco.200905267
34.) M. Sun, K. Xiao, C. Dong and X. Li, "Electrochemical Corrosion Behavior of 300m Ultra High Strength Steel in Chloride Containing Environment",
Acta Metallurgia Sinca, 23, 301 (2010).
DOI:
http://dx.doi.org/http://210.72.130.126/jsxb_en/EN/article/downloadArticleFile.do?attachType=PDF&id=19041
35.) C. Wong, C. Mak and K. Wong, "Potentiostatic Deposition of Zinc Oxide on Flexible Substrate",
Advances in Science and Technology, 75, 43 (2010).
DOI:
http://dx.doi.org/10.4028/www.scientific.net/AST.75.43
36.) T. Zaid, D. Starosvetsky, A. Irace, M.D. Laurentis and Y. Ein-Eli, "Achieving Extreme Etching Rates by Overcoming Silicon Passivity",
Electrochemical and Solid State Letters, 13, H185 (2010).
DOI:
http://dx.doi.org/10.1149/1.3358141
37.) Q. Zhang, X. Li, H. Shi, Hongzhou and Z. Yuan, "Determination of Trace Selenium by Differential Pulse Adsorptive Stripping Voltammetry at a Bismuth Film Electrode",
Electrochimica Acta, 55, 4717 (2010).
DOI:
http://dx.doi.org/10.1016/j.electacta.2010.03.068
38.) B. Zhang, Y. Li and F. Wang, "Observations of Anomalies in the Anodic Behaviour of Microcrystalline Aluminium",
Corrosion Science, 52, 2612 (2010).
DOI:
http://dx.doi.org/10.1016/j.corsci.2010.04.009
39.) C.F. Dong, Z.Y. Liu, X.G. Li and Y.F. Cheng, "Effects of Hydrogen-Charging on the Susceptibility of X100 Pipeline Steel to Hydrogen-Induced Cracking",
International Journal of Hydrogen Energy, 34, 9879 (2009).
DOI:
http://dx.doi.org/10.1016/j.ijhydene.2009.09.090
40.) H. Duan, C. Yan and F. Wang, "Growth Process of Plasma Electrolytic Oxidation Films Formed on Magnesium Alloy Az91d in Silicate Solution",
Electrochimica Acta, 52, 5002 (2009).
DOI:
http://dx.doi.org/10.1016/j.electacta.2007.02.021
41.) M. Fulger, D. Ohai, M. Mihalache, M. Pantiru and V. Malinovschi, "Oxidation Behavior of Incoloy 800 under Simulated Supercritical Water Conditions",
Journal of Nuclear Materials, 385, 288 (2009).
DOI:
http://dx.doi.org/10.1016/j.jnucmat.2008.12.004
42.) Y.V. Ingelgem, E. Tourwe, O. Blajiev, R. Pintelon and A. Hubina, "Advantages of Odd Random Phase Multisine Electrochemical Impedance Measurements",
Electroanalysis, 21, 730 (2009).
DOI:
http://dx.doi.org/10.1016/j.jnucmat.2008.12.004
43.) K. Kamaraj, S. Sathiyanarayanan, S. Muthukrishnan and G. Venkatachari, "Corrosion Protection of Iron by Benzoate Doped Polyaniline Containing Coatings",
Progress in Organic Coatings, 64, 460 (2009).
DOI:
http://dx.doi.org/10.1016/j.porgcoat.2008.08.008
44.) Y. Ke, F. Yan, R.P. Devaty and W.J. Choyke, "Surface Polishing by Electrochemical Etching of P-Type 4h Sic",
Journal of Applied Physics, 106, 064901 (2009).
DOI:
http://dx.doi.org/10.1063/1.3212541
45.) C. Liang, P. Wang, B. Wu and N. Huang, "Inhibition of Copper Corrosion by Self-Assembled Monolayers of Triazole Derivative in Chloride-Containing Solution",
Journal of Solid State Electrochemistry, 14, 1391 (2009).
DOI:
http://dx.doi.org/10.1007/s10008-009-0956-5
46.) S. Sathiyanarayanan, R. Jeyaram, S. Muthukrishnan and G. Venkatachari, "Corrosion Protection Mechanism of Polyaniline Blended Organic Coating on Steel",
Journal of the Electrochemical Society, 156, C127 (2009).
DOI:
http://dx.doi.org/10.1149/1.3073874
47.) S. Sathiyanarayanan, K. Maruthan, S. Muthukrishnan and G. Venkatachari, "High Performance Polyaniline Containing Coating System for Wet Surfaces",
Progress in Organic Coatings, 66, 113 (2009).
DOI:
http://dx.doi.org/10.1016/j.porgcoat.2009.06.008
48.) S. Sathiyanarayanan, S.S. Azim and G. Venkatachari, "Corrosion Protection of Galvanized Iron by Polyaniline Containing Wash Primer Coating",
Progress in Organic Coatings, 65, 152 (2009).
DOI:
http://dx.doi.org/10.1016/j.porgcoat.2008.11.002
49.) M. Ünlü, J. Zhou and P.A. Kohl, "Anion Exchange Membrane Fuel Cells: Experimental Comparison of Hydroxide and Carbonate Conductive Ions",
Electrochemical and Solid State Letters, 12, B27 (2009).
DOI:
http://dx.doi.org/10.1149/1.3058999
50.) M. Ünlü, J. Zhou and P.A. Kohl, "
Hybrid Anion and Proton Exchange Membrane Fuel Cells", Journal of Phys. Chem. C, 113, 11416 (2009).
DOI:
http://dx.doi.org/10.1021/jp903252u
51.) J. Xu, Y. Li and F. Wang, "Effect of Al Content on the Electrochemical Properties of Mg2-Xalxni Thin Film Hydride Electrodes",
Electrochimica Acta, 55, 148 (2009).
DOI:
http://dx.doi.org/10.1016/j.electacta.2009.08.024
52.) Y.V. Ingelgem, E. Tourwe, J. Vereecken and A. Hubin, "Application of Multisine Impedance Spectroscopy, Fe-Aes and Fe-Sem to Study the Early Stages of Copper Corrosion",
Electrochimica Acta, 53, 7523 (2008).
DOI:
http://dx.doi.org/10.1016/j.electacta.2008.01.052
53.) S. Soualmi, L. Ignatovich, E. Lukevics, A. Ourari and V. Jouikov, "Electrochemical Oxidation of Benzyl Germatranes",
Journal of Organometallic Chemistry, 693, 1346 (2008).
DOI:
http://dx.doi.org/10.1016/j.jorganchem.2008.01.031
54.) F.T. Cheng, K.H. Lo and H.C. Man, "An Electrochemical Study of the Crevice Corrosion Resistance of Niti in Hanks’ Solution",
Journal of Alloys and Compounds, 437, 322 (2007).
DOI:
http://dx.doi.org/10.1016/j.jallcom.2006.07.127
55.) K.Y. Chiu, M.H. Wong, F.T. Cheng and H.C. Man, "Characterization and Corrosion Studies of Fluoride Conversion Coating on Degradable Mg Implants",
Surface and Coatings Technology, 202, 590 (2007).
DOI:
http://dx.doi.org/10.1016/j.surfcoat.2007.06.035
56.) H. Duan, C. Yan and F. Wang, "Effect of Electrolyte Additives on Performance of Plasma Electrolytic Oxidation Films Formed on Magnesium Alloy Az91d",
Electrochimica Acta, 52, 3785 (2007).
DOI:
http://dx.doi.org/10.1016/j.electacta.2006.10.066
57.) Y. Ke, R.P. Devaty and W.J. Choyke, "Self-Ordered Nanocolumnar Pore Formation in the Photoelectrochemical Etching of 6h Sic",
Electrochemical and Solid State Letters, 10, K24 (2007).
DOI:
http://dx.doi.org/10.1149/1.2735820
58.) Y. Ke, F. Yan, R.P. Devaty and W.J. Choyke, "Electrochemical Polishing of P-Type 4h Sic", Materials Science Forum, 615-617, 601 (2007).
DOI:
http://dx.doi.org/10.4028/www.scientific.net/MSF.615-617.601
59.) Y. Ke, R.P. Devaty and W.J. Choyke, "Nano-Columnar Pore Formation in the Photo-Electrochemical Etching of N-Type 6h Sic",
Materials Science Forum, 556-557, 741 (2007).
DOI:
http://dx.doi.org/10.4028/www.scientific.net/MSF.556-557.741
60.) Y.J. Ren and C.L. Zeng, "Corrosion Protection of 304 Stainless Steel Bipolar Plates Using Tic Films Produced by High-Energy Micro-Arc Alloying Process",
Journal of Power Sources, 171, 778 (2007).
DOI:
http://dx.doi.org/10.1016/j.jpowsour.2007.06.075
61.) Y. Ke, F. Yan, R.P. Devaty and W.J. Choyke, "Columnar Pore Growth in N-Type 6h Sic",
Materials Science Forum, 527-529, 739 (2006).
DOI:
http://dx.doi.org/10.4028/www.scientific.net/MSF.527-529.739
62.) Y. Ke, C. Moisson, S. Gaan, R.M. Feenstra, R.P. Devaty and W.J. Choyke, "A Comparison of Various Surface Finishes and the Effects on the Early Stages of Pore Formation During High Field Etching of Sic" (2006).
DOI:
63.) Y. Ke, R.P. Devaty and W.J. Choyke, "Comparative Columnar Porous Etching Studies on N-Type 6h Sic Crystalline Faces",
Physica Status Solidi b, 245, 1396.
DOI:
http://dx.doi.org/10.1002/pssb.200844024
64.) D. Lucan, "Behaviour of the Steam Generator Tubing in Water with Different Ph Values",
Nuclear Engineering and Design.
DOI:
http://dx.doi.org/10.1016/j.nucengdes.2010.03.029