4001A-P and 4001C-P NIM Bins

The 4001A -Pand 4001C-P NIM Bins accommodate any equipment modules that have been manufactured to NIM standards as defined in DOE/ER-0457T. The bins are constructed of wire-form grids to ensure unimpeded ventilation for the instruments operated in the enclosure. The adjustment-free module guides are superior to the requirements specified in DOE/ER-0457T. These hardened steel guides feature generous openings and, because of their highly-polished nickel plating, offer a low friction coefficient. Aluminum alloy side plates 
are precision-formed and protected with a painted finish. Secure mounting for the 4002A-P, 4002D-P Power Supplies is furnished by the precision-stamped, plated-steel, connector mounting plate. 

The 4001A-P Bin distributes all dc and ac power levels from the power supply to the module connectors through a wiring harness. The 4001C-P Bin distributes the power through heavy-duty copper bus bars, wire, and a printed wiring board (PWB), ensuring a uniform 
voltage output to even high-power modules. The 4001C-P Bin is recommended for use with the higher-current power supplies (the 4002D-P). 

The 4001A-P and 4001C-P NIM Bins can be ordered as separate bins for use with existing power supplies, or ordered assembled with the appropriate NIM bin power supply. See the Ordering Information for details. The NIM bins incorporate the necessary brackets for rack mounting. 
  • Specifications +


    4001A-P BIN 
    MODULE CONNECTORS 12 each as specified by DOE/ER-0457t.
    INSTALLED WIRING All connectors wired in parallel for +12 V, -12 V, +24 V, -24 V, +6 v, -6 v, high-quality ground, power-return ground, and 117 v ac, in accordance with DOE/ER-0457T pin assignments. An interface connectro is supplied as required by DOE/ER-0457T for connecting control and power supply.
    CONTROL PANEL A control panel with On/Off switch, power-indicating lamp, and thermal warning lamp for mating power supply.  The thermal warning lamp is illuminated when the operating temperature approaches the design limit.  Voltage test points are provided fro convenient monitoring of the power supply outputs.
    CONSTRUCTION Alumimum alloy side plates with nickel-chromium-plated handles on front-panel mounting flanges.  Top and bottom members are high-tensile steel rod weldments, nickel plated, containing module guides.  Rear connector plate is steel, cadmium plated.
    4001C-P BIN
    MECHANICAL Identical to 4001A-P Bin.
    ELECTRICAL Meets specifications for laminated busses as outlines in DOE/ER-0457T.

    DIMENSIONS AND WEIGHT
    Dimensions Weight (approx.)

    Model

    Height

    Width

    Depth

    Shipping

    Net

    4001A-P or 4001C-P Bin

    22.2 cm
    8-3/4 in.

    48.3 cm
    19 in.

    27.3 cm
    10-3/4 in.

    8.2 kg
    18 lb

    50.0 kg
    11 lb

    4001A-P/4002A-P Assembled

    22.2 cm
    8-3.4 in.

    48.3 cm
    19 in.

    40.6 cm
    16 in.

    15.9 kg
    34 lb

    11.8 kg
    26 lb

    4001A-P/4002D-P Assembled

    22.2 cm
    8-3/4 in.

    48.3 cm
    19 in.

    54.0 cm
    21-1/4 in.

    24 kg
    53 lb

    16.3 kg
    36 lb

    4001C-P/4002D-P Assembled

    22.2 cm
    8-3/4 in.

    48.3 cm
    19 in.

    54.0 cm
    31-1/4 in.

    24 kg
    53 lb

    16.3 kg
    36 lb


    ORDERING INFORMATION
    The 4001A-P and 4001C-P NIM Bins may be ordered separately, or assembled with a power supply, using the model numbers shown below.
    Model Description
    4001A-P NIM Bin
    4001C-P NIM Bin (with copper bus bars)
    4001A-P/4002A-P NIM Bin and 96-W Power Supply (with ±12 V,  ±24 V)
    4001A-P/4002D-P NIM Bin and 160-W Power Supply (with ±6 V, ±12 V, ±24 V)
    4001C-P/4002D-P NIM Bin (with copper bus bars) and 160-W Power Supply (with ±6 V, ±12 V, ±24 V)
  • Documents +